Longevity 880306 Manuel d'instructions télécharger pdf (Page 6)

5 | P a g e

Warnings and Safety

Welding and plasma cutting may be dangerous to the operator and to bystanders, if the

equipment is not operated properly. Welding or cutting must be performed in accordance with

all relevant safety regulations. Carefully read and understand this instruction manual before

installing and operating this equipment.

Changing function modes during welding may damage

equipment.

Before welding, disconnect the electrode-holder cable from the

equipment.

A circuit breaker is required to prevent electrical overload of the

equipment.

Only high quality welding tools should be used.

Electric Shock can be fatal.

Ensure that ground cable is connected in accordance with

applicable safety codes.

Never touch electrodes, wires, or circuit components with bare

hands. Wear dry welding gloves when welding.

The operator must be insulated from the work piece.

Smoke and gas can be harmful to health.

Ensure that the working area is well ventilated.

Avoid breathing smoke and gas generated during the welding

process. Cutting and welding can cause cancer because of the

smoke that comes from the welds and cuts.

Arc-light emission can be harmful to eyes and skin.

Always wear a welding helmet, anti-radiation glass, and work

clothes while welding.

Ensure that people in or near the working area are protected.

1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Pas de commentaire

Longevity 880306 Manuel d'instructions Page 6